- Company overview The heart of SMC Vision & Philsophy Partnership Certifications Company culture
- Our service Design and Engineering Maintenance and Service Examine Production Line Upgrade and Transformation Storage and Logistics Processing, Trading and Distributor
- Management Our history Global responsibility Info Center
- Procurement center Internship
- Metal Steel Products Stainless Steel Products Aluminum Products Copper Products Galvanized Steel and PPGI Special Alloy Building Material
- Containers ISO Standard Container Equipment Container Storage Container Container House Refrigerated/Reefer Container Offshore Container Tank Container Container Fittings Container Trailer
- Gas Cylinder & Fire Extinguisher Cryogenic Liquid Cylinder Oxygen Gas Cylinder Storage Tank CNG Gas Cylinder LPG Gas Cylinder Hydrogen Gas Cylinder Nitrogen Gas Cylinder Industry Gas Cylinder Fire Extinguisher
- Metal Machinery Forming Machine Other Machinery Cutting Machine Processing Machine Bending Machine Block Machine Motor Spare Parts
- Mechanical Products Vehicle Industry Miscellany Mooring Equipment Marine Equipment Pressure Vessel Conveyor Belt Laser Equipment Bearing
- Electrical System Electrical Cable Automation Power Distribution Solar Power System Electric Protection System Transformer Production Line Lighting System
- Project Fiberglass Reinforced Plastic Plastic Pipes and Pipe Fittings Pontoon System
Cold Formed (Channels- Angles- C Channels- steel sheet piles)
Application: Construction
Type: Carbon Structural Steel
Shangahai Metal Corporation's Cold-formed Steel Sections are suitable for practically any kind of steel structure, whether for commercial or residential use. They are also available for use in machines and appliances.
-
1) Size: 41mm*21mm or 41mm*41mm back to back 41*41mm, 41*62mm,41*82mm
2) Thickness: 4 mm ~ 8mm
3 )Length: 10 and 20 feet(3m,5.8m,6m ),special lengths are available upon request
4) Holes: 9*35mm,11*35mm,14*30mm etc
5) Material: Cold Formed Carbon Steel
6) Surface Treatment: Slotted hole,HDG(hot dipped galvanized),Pre-galvanized,Cold-galvanizing,powder coating
7) Standard: ASTM, DIN, GB, JIS
8) Type: Slotted or plain
9) Certificate: ISO9001
-
1) size: 2# - 20#
2) Thickness: 3.0 - 16.0
3) Length : (line-specific differences)≤21 000,special length are available upon request
4) Material :Cold Formed Carbon Steel
5) Surface Treatment: :HDG(hot dipped galvanized),Pre-galvanized,Cold-galvanizing,powder coating
6) Standard : ASTM, DIN, GB, JIS
7) Type : Slotted or plain
8)Chemical Composition:C Si P Mn
9) Certificate : ISO9001
-
-
- the strength to weight ratio is excellent;
- metals join easily;
- efficient shapes are available etc.
These advantages create challenges that are best solved by a good understanding of how the metals actually perform in a structure.
-
1) Width :20mm-350mm
2) Length: According to customer
3) Thickness: 0.8-6mm
4) Material :Cold Formed Carbon Steel, Electric galvanize, Galvanized steel sheet
5) Surface Treatment :Slotted hole,HDG(hot dipped galvanized),Pre-galvanized,Cold-galvanizing,powder coating
6) standard:SS400,Q235,Q345 ASTMA36 GB/T6723
7) Type : Slotted or plain
8) Certificate : ISO9001
9) Holes :9*35mm,11*35mm,14*30mm etc.
10)Tolerance:+/-1.8
We also produce Unequal C Channels, Perforated C Channels, Electric C Channels, Galvanized C Channels.
-
1) Design according to customers’ requirements
2) Manufacture under complete quality control system---ISO9001
3) Installation with instruction of experienced engineers
4) Easy to assemble and dismantle
5) Eco-friendly material: can be used for several times and can be recycled
6) Shorter construction period, longer using time
7) High strength and stiffness, high weight bearing
-
-building frames, bench frames, floor framing
-roof , trusses
-gates, fences, cattle grids, scaffolds
-tank stands, television towers
-car trailers, rails, etc.
Structural steel shapes are suitable for a wide variety of uses.
-
-
1) Thickness:3mm-17mm
2) Width: 400-900mm
3) Length: According to customer
4) Grade:S235, S355GP, S430GP,Q345B,MDB350
5) Material :Cold Formed Carbon Steel, Electric galvanize, Galvanized steel sheet
6) Surface Treatment: :HDG(hot dipped galvanized),Pre-galvanized,Cold-galvanizing,powder coating
7) Certificate : ISO9001
-
1) High strength to weight ratio
2) Good degree of watertightness
3) Comprehensive range of heavy section profiles and lengths availableSteel Pile 3D
4) High section modulus leading to reduced deflections
5) Good driving properties and durability
6) Lengths up to 18m available for hire
7) Metal-to-metal interlocking design provides positive retention of soil and water
8) Nestable pieces reduce storage and shipping costs
Parameters of Cold-formed Channel Steel:
-Shanghai-Metal-Corporation.jpg)
Parameters of Cold formed Channel Steel:
-Shanghai-Metal-Corporation1.jpg)
Parameters of Cold formed C Channels:
-Shanghai-Metal-Corporation2.jpg)
Parameters of steel sheet piles:
-Shanghai-Metal-Corporation3.jpg)
-Shanghai-Metal-Corporation4.jpg)
-Shanghai-Metal-Corporation5.jpg)
Packaging of Cold Formed Steel Section:
Shanghai Metal Corporation Products are packed and labeled according to the regulations and customer's requests. Great care is taken to avoid any damage which might be caused during storage or transportation. In addition, clear labels are tagged on the outside of the packages for easy identification of the product I. D. and quality information.
1)SMC Standard
2)Customization Service
To meet the entirety of our customers business needs, SMC offers its services as a “One-Stop Shop” for business services including Purchasing, Value-Added Manufacturing, Packaging/Labeling, and Delivery.
SMC prides itself on achieving superior results and satisfying customer needs. In this, we earnestly strive to fulfill our role as trustworthy and reliable supplier of business services throughout the entire world.
Our Value-Added Manufacturing Services not only save our customer time from having to out-source, but also spare them the cost of dealing with several disparate shops and deadlines.
Tolerances of Cold formed Channel Steel:
Dimensional and cross-sectional tolerances of cold-formed sections are specified in EN 10162. Customer-specific tolerances can be agreed on separately. SMC also offers tolerances with cross-sectional wall thicknesses of ＞8- ≤12.5 mm. The standard states that the tolerances in this thickness range are to be agreed on separately.
here
for
price
