- Company overview The heart of SMC Vision & Philsophy Partnership Certifications Company culture
- Our service Design and Engineering Maintenance and Service Examine Production Line Upgrade and Transformation Storage and Logistics Processing, Trading and Distributor
- Management Our history Global responsibility Info Center
- Procurement center Internship
- Metal Steel Products Stainless Steel Products Aluminum Products Copper Products Galvanized Steel and PPGI Special Alloy Building Material
- Containers ISO Standard Container Equipment Container Storage Container Container House Refrigerated/Reefer Container Offshore Container Tank Container Container Fittings Container Trailer
- Gas Cylinder & Fire Extinguisher Cryogenic Liquid Cylinder Oxygen Gas Cylinder Storage Tank CNG Gas Cylinder LPG Gas Cylinder Hydrogen Gas Cylinder Nitrogen Gas Cylinder Industry Gas Cylinder Fire Extinguisher
- Metal Machinery Forming Machine Other Machinery Cutting Machine Processing Machine Bending Machine Block Machine Motor Spare Parts
- Mechanical Products Vehicle Industry Miscellany Mooring Equipment Marine Equipment Pressure Vessel Conveyor Belt Laser Equipment Bearing
- Electrical System Electrical Cable Automation Power Distribution Solar Power System Electric Protection System Transformer Production Line Lighting System
- Project Fiberglass Reinforced Plastic Plastic Pipes and Pipe Fittings Pontoon System
Inconel X-750
Grade: GH4145/N07750/Inconel x-750/NCF750B
Density: 8.25g/cm³
Melting point： 1395-1425℃
Tensile Strength: 1180 Mpa
Yield strength: 790 Mpa
Shanghai Metal Corporation is a leading Inconel X-750 Strip manufacturer and supplier.
Inconel alloy mainly X - 750 gamma "[Ni3 (Al, Ti, Nb)] in the ageing strengthening, nickel-based superalloy under 980 ℃ has good corrosion resistance and oxidation resistance, under 800 ℃ has high strength, good relaxation resistance under 540 ℃, at the same time also has good formability and weldability.This alloy is mainly used in the manufacture of aircraft engine work under 800 ℃ and the relaxation resistance of high strength required flat spring and helical spring.It can also be used to make turbine blades and other parts.The products available are sheet, strip, bar, forging, ring, wire and pipe.
If you want to know more about our Inconel X-750 product and Invar product price please feel free to contact us, we will reply you within 24 hours.
-
1. It can be used to make parts such as turbine blades
2. It can be used to make high strength slack-resistant planar springs and coil springs for aerospace engines
3. Rocket engine thrust chamber
4. Thrust device on the aircraft
5. High pressure container
6. Pallets, baskets and fixtures used in the heat treatment plant
7. Wire split annealing and radiation tube, high speed gas burner, wire mesh belt in industrial furnace
8. Separation tank in ammonia reforming and catalytic support grid in nitric acid manufacturing
9. Exhaust system components
10. Combustion chamber of solid waste incinerator
11. Pipe support and ash handling parts
12. Components of waste gas detoxification system
13. Oxygen reheater
-
-
-
Hardness Test
Tensile Strength Test
Elongation Test
Yield strength
Technical Information of Inconel X-750 Strip:
|
C |
Cr |
Ni+Co |
Al |
Ti |
Fe |
Nb+Ta |
|
≤0.08 |
14.0~17.0 |
≥70.0 |
0.40~1.00 |
2.25~2.75 |
5.00~9.00 |
0.70~1.20 |
|
Co |
Mn |
Si |
S |
Cu |
P |
|
≤ |
|
|
|
|
|
|
1.00 |
1.00 |
0.50 |
0.010 |
0.50 |
0.015 |
Treatment process of Inconel X-750 Strip:
Plate, belt, pipes supply state of 15 ℃ to 980 ℃ + solution heat treatment system, air cooling. The intermediate heat treatment system of materials and parts can be respectively adopted in the following processes.
Annealing: 955 ~ 1010 ℃, water cooling.
Weldments annealing before welding: 980 ℃, 1 h.
Weldments eliminating stress annealing: 900 ℃, moisturizing 2 h.
Eliminating stress annealing: 15 ℃ 885 ℃ +, 24 h, air cooling.
here
for
price
